200 HF Inverter TIG Welder Package
200 HF Inverter TIG Welder Package
The Fusion HF was developed to provide a portable practical solution to carry out quality TIG welding not only in the workshop but also on site.
These machines are the ideal choice for the professional TIG welding engineer.
The digitally controlled welder incorporates a LCD display. Each function is displayed clearly in the LCD window, and a simple turn of the 360° encoder scrolls through the parameters allowing for the selection of the required settings.
Post flow gas time, HF, Lift arc start, slope out time, 2/4 touch switching options, and the remote current control functions are standard features in the multi choice menu.
The digital welding meter clearly shows both the selected welding current prior to welding and the actual current used during the welding process.
TIG or MMA mode is displayed at all times on the LED function display.
As well as the advanced TIG welding facility the HF machine has full MMA (Stick) capability, incorporating all the facilities that are available in the specialist MMA range. An additional MMA feature available only in the HF and PHF range is the ability to use a remote current control device for the adjustment of the welding current in difficult to access areas.
Technical Specifications | |
Input Voltage AC 50/60Hz +/- 15% | 230 |
Typical Input Fuse Rating Amps | 22 SB |
Recommended Generator Rating KVA | 7 |
MMA Power Output Amps | 20 – 180 |
TIG Power Output Amps | 5 – 200 |
100% Duty Cycle @ MMA Amps | 160 |
100% Duty Cycle @ TIG Amps | 180 |
Max Open Circuit Volts | 97 |
Power Factor @ 100% | 0.71 |
Efficiency @ 100% | 0.94 |
Enclosure Class | IP 23 |
Ambient Temperature | -10°C to +40°C |
Cooling Method | Forced Fan |
Standard | IEC 60974 CE Marked |
Warranty | 24 Months |
Weight | 9Kg |
Dimensions | L365mm x H360mm x W220mm |
Mains Power Indicator | Yes |
Mode Function Indicator | Yes |
Over Temperature Indicator | Yes |
Digital Power Output Meter | Yes |
LED Function Display | Yes |
LCD Menu Display | Yes |
High Frequency Start | Yes |
Automatic Arc Force | Yes |
Pre-Gas Timer | – |
Start Current Control | Pre Set |
Up-Slope Timer | – |
Pulse Current Control | – |
High Pulse Timer | – |
Base Pulse Timer | – |
Down-Slope Timer | 0 – 15 Sec |
Final Current Control | – |
Final Current Timer | – |
Post Gas Timer | 0 – 25 Sec |
Torch 2T & 4T Switch Control | Yes |
Remote Current Control | Yes |
Spot Welding Timer | – |
Dead Man Safety Cut Out | Yes |