LN-25 Wire Feeder

Portable, Semiautomatic Wire Feeder - K449 LN-25 w/Contactor & Gas Solenoid

The LN-25 semiautomatic wire feeder is ideal for field or construction use. Since it is powered across the arc, no control cables are needed! Simply connect the weld cable, attach the welding clip, and you’re ready to go. The fully enclosed case ensures that this portable MIG and flux-cored wire feeder can tough out any work site.

This portable unit is designed for MIG or flux-cored wire feeding. The totally enclosed case accepts 10-44 lb. wire packages for welding versatility. The LN-25 features a tool-less quick release mechanism for easy wire changing.

Advantage Lincoln

• For MIG and flux-cored arc welding processes using up to 44 lb. (19.9 kg) spools.
• Designed for .023-1/16” solid and .035-5/64" cored wire sizes.
• Selectable dial for setting low range 50-350 ipm (1.3-8.9m/min) wire feed speed or high range 50-700 ipm (1.3-17.8m/min) wire feed speed.
• Includes DC voltmeter, voltmeter polarity switch and 15 ft. (4.6m) voltage sensing lead and clip.
• Dynamic braking system stops wire feed motor quickly to minimize wire overrun.
• Automatic overvoltage and motor overload shutdown protection.
• Tool-less quick release wire drive tension system and gun cable connections for easy wire or gun changes.
• Fully enclosed molded case meets UL94-VO flammability resistance and is heat, spatter, and impact resistant.
• Case has double latches for easy access to wire and includes an insulated gun holder.
• Entire unit is compact and portable and will pass through a 16" (400mm) diameter manhole.
• Optional gas solenoid, timer kit for preflow and postflow of gas, internal contactor, and remote voltage control kits are available.
• CSA approved.
• 3 year warranty on parts and labour.
• Manufactured under a quality system certified to ISO 9001 requirements.
• The LN-25 provides constant wire feed speed for use with constant voltage (CV) power sources, and arc sensing wire feed speed for use with constant current (CC) power sources.

Physical specifications

• Weight:35 lbs. (15.4 kgs.)
• Dimensions (in) HxWxD:14 x 7.4 x 21
• Dimensions (mm) HxWxD:356 x 188 x 533

Ranger 300 DLX

K1522-2 Ranger 300 DLX Kubota

A favourite of contractors, farmers, utility companies, portable service, and rental companies, the Ranger 300 DLX offers a serious 300 amps of AC or DC output. Combine all the process capabilities that a professional welder needs, with the benefits of insonorization for low noise, and you have a very popular engine-driven welder!

Advantage Lincoln

• For stick, TIG, flux-cored and MIG processes up to 300 amps @ 100% duty cycle.
• Water-cooled, diesel engine.
• Suitable as a stand alone power generator - 12,000 watts AC.
• Amphenol connections for remote control, and wire feeder connection.
• Automatic engine idler.
• Also includes: hour meter, glow plugs, start/stop switch, battery charging ammeter, polarity switch, two 120 volt duplex receptacles, and one 120/240 volt full KVA receptacle.
• Approved for use in Canada by Canadian Standards Association (CSA).
• 3 year warranty on parts and labour (Separate engine warranty per the manufacturer).

Physical specifications

• Weight:1133 lbs. (514 kgs.)
• Dimensions (in) HxWxD:37.4 x 24.8 x 60.5
• Dimensions (mm) HxWxD:949 x 629 x 1529